The completion inspection and acceptance of fire engineering
I. Fire fighting electrical system
1. Test the insulation resistance, grounding resistance, grounding resistance of the system, installation and protection of pipelines (fire resistance level, spraying) of the automatic fire alarm system;
2. Check the setting status, installation quality, protection radius and distance from the surrounding occlusion, etc. of fire detector and manual alarm button, and sample check its alarm function at a ratio of 30~50%;
3. Test the installation quality of the fire alarm controller, the wiring in the cabinet, the setting of protective grounding, the setting of main and standby power sources and their conversion functions, and test the functions of the controller;
4. Test the installation quality of the control cabinet of fire equipment, wiring, hand and automatic control of the cabinet, and accept the signal feedback function of the screen of fire equipment;
5. Detect the audio functions of fire emergency broadcast, such as manual layer selection and automatic broadcast, remote control on and forced switch;
6. Test the fire telephone communication function in the fire control room, fire equipment room and the manual button;
External communication function;
7. Test the setting position and obvious signs of the fire control room, the setting of the indoor fire valve and irrelevant pipelines (no water), the setting and switching function of the double-circuit power supply;
8. Test the functions of the elevator for combined emergency landing and the use of the fire elevator, and check whether the three (five) calls are clear.
9. Test the setting, illumination, conversion time and graphic symbols of fire emergency lighting and evacuation indication signs;
10. Check the strong opening of emergency lighting and the strong cutting of non-fire power supply.
Cut off non-fire power supply function and light display function of fire layer;
11. Detect the automatic switch of the main and standby generators and all end switches.
12. Whether the CRT is set according to the regulations (public buildings over 50m, super high-rise, super high-rise commercial and residential buildings over 50m)
Recently Posted
-
Situation analysis of fire emergency lights
December 28, 2020Emergency lighting is a very important existence in our daily life and an important safety facility for modern public buildings and industrial buildings. It is closely related to personal safety and building safety.When a fire or other disaster occurs in a building and the power supply is cut off, emergency lighting plays an important role in personnel evacuation, fire rescue work, important production, continuous operation oRead More -
Microwave radar sensor LED lights
December 28, 2020Basic Introduction editingMicrowave radar induction LED lamp, also known as radar induction LED lamp, is based on The Doppler effect, using the most advanced plane antenna, can effectively suppress the interference of high harmonic and other clutter, high sensitivity, strong reliability, safety and convenience, intelligent energy saving, is the first choice of intelligent building and modern property management products.MicroRead More -
How do I use a disinfectant lamp
December 28, 2020Shaw poison lamp is to point to commonly is ultraviolet disinfection lamp, this kind of lamp can very good carry on disinfection sterilization in place environment, have very good effect, because ultraviolet ray has very good the effect that destroys microorganism, be applied widely so, what is the use method of so disinfection lamp?When using disinfection disinfection lamp, first determine whether the surface disinfection, wRead More -
How do I use a disinfectant lamp
December 28, 2020Shaw poison lamp is to point to commonly is ultraviolet disinfection lamp, this kind of lamp can very good carry on disinfection sterilization in place environment, have very good effect, because ultraviolet ray has very good the effect that destroys microorganism, be applied widely so, what is the use method of so disinfection lamp?When using disinfection disinfection lamp, first determine whether the surface disinfection, wRead More